(855) 640-1911 | Email: info@precisionplasticsinc.com | Hours: Mon-Fri 8AM-6PM

CHAMPION 

DUCT® CONDUIT

LIGHTWEIGHT FIBERGLASS CONDUIT WITH UNMATCHED VERSATILITY AND STRENGTH.

ONE STOP SHOP FOR ALL YOUR
CONDUIT NEEDS 855-729-9531

LEARN SOLID SURFACELEARN QUARTZ
champion-duct.png__PID:408e9038-7b80-469f-a8a7-c8b042140379

PRODUCT OVERVIEW

Champion Duct® (RTRC) electrical conduit offers dependability through quality design and unmatched versatility. Below ground, concrete encased, underbridge – and almost anywhere in between – Champion Duct delivers a range of benefits over other rigid electrical raceway conduit materials like PVC-coated steel and thin wall EMT conduit pipe, including ease of installation, fire and corrosion resistance, excellent impact resistance and more.

CHAMPION DUCT CONDUIT OFFERS THE FOLLOWING BENEFITS:

LOWER INSTALLATION COSTS

  • The lowest man-hour installation rates for most diameters of electrical duct according to the National Electrical Contractors Association (NECA) Manual of Labor Units
  • Lower total installation costs (labor plus material costs) for most diameters

ENHANCED PERFORMANCE OVER THE OTHER CONDUIT SYSTEMS

  • Corrosion resistance to many chemicals
  • Lower total installation costs (labor plus material costs) for most diameters
  • No burn-through on elbows
  • One of the lowest coefficients of friction of any in-market product
  • Ability to retain its shape after impact or compression
  • Withstands extreme conditions and temperatures
  • Cable fault resistance —fiberglass duct will not melt or weld the wire to the inside of the conduit under fault conditions
  • Extended UL Listed support spacing distances rival rigid steel conduit support spans.

FIBERGLASS CONDUIT DATA SHEETS:

  • Champion Fiberglass Product Comparision Chart
  • Specifications for Fiberglass Conduit Below ground
  • Specifications for Fiberglass Conduit Above ground
  • NEMA Standards Publication
  • NECA Manual of Labor Units
  • Champion Fiberglass Product Comparision Chart

SDS:

  • SDS Champion Dct®
  • SDS Champion Dct® (CAN Eng)
  • SDS Champion Dct® (CAN French)
  • SDS Epoxy Adhesive, Part A
  • SDS Epoxy Adhesive, Part B
  • SDS CF Part A Adhesive 70 DG.F, Fast Gel
  • SDS CF Part B Adhesive 70 DG.F, Fast Gel
  • SDS CF Part A Adhesive Super Fast Gel
  • SDS CF Part B Adhesive Super Fast Gel
  • SDS Polyester Strut
  • SDS Vinyl Ester Strut

Champion Duct Conduit meets the following specifications and requirements:

UL AND OTHER LISTINGS

  • Standard Wall, Medium Wall (UL designates Champion Fiberglass MW for 5″ and 6″ as SW), and Heavy Wall conduits are UL Listed for newly expanded support spacing distances
  • UL 2515 Listed for above and below ground installations
  • UL 2420 Listed for below-ground installations
  • CSA listed per CSA-22.2 No 211.3-96 standards

Fiberglass conduit is listed in Article 12-200 of the CEC (Canadian Electrical Code) as Rigid RTRC Conduit. 

You’ll find it listed in the NEC (National Electrical Code) in Article 355 as Reinforced Thermosetting Resin Conduit.

A 100% DIGITAL FACILITY THAT STRIVES TO MEET ENVIRONMENTAL AND SYSTEM MANAGEMENT REQUIREMENTS

  • ISO 9001 – Certified in quality management systems for over a decade
  • ISO 14001 – World’s premier environmental management certification
  • ISO 45001 – Certified occupational health and safety management systems

CHAMPION DUCT CATALOG AND INFO

Champion_DuctCatalog_cover_813x1052-231x300.jpg__PID:6ff49cdd-7a0d-4d52-bf1e-86df51ad8c1d

CHAMPION DUCT® CATALOG

compare-chart.png__PID:fd082623-588e-47fc-96df-6e5eee781a46

PRODUCT COMPARISON CHART

extended-support.png__PID:103d4612-05ce-4e37-b8c2-1c234540738f

UL EXTENDED SUPPORTSPAN FLYER

facilities-flyer.png__PID:64668180-0f59-4522-84bb-2be8922fa42e

WWTP FACILITIES FLYER

steel-flyer.png__PID:dd6befc8-7629-40ad-94d3-8199ec827fea

WHY USE FIBERGLASS CONDUIT VS. PVC COATED STEEL FLYER

adhesive.png__PID:f39fa9d0-81d4-49e5-8402-e710d0e426f5

ADHESIVE TUBES FLYER

FAQ

From ¾” to 12” and 11 1/4° to 90°, a full list can be found in our catalog, and larger radii can be supplied. All elbows are supplied with plain ends; we offer an assortment of transition and termination fittings that can be installed on our elbows.

The Champion Duct® Joining System includes the interference joint, straight socket, gasket joint (triple seal), and tight lock joint plus adhesive and various sleeve couplings and adapters. To estimate the number of joints and adhesive cartridges necessary for your project, see our Epoxy Adhesive Calculator. For information on which joints to use by application and National Electrical Code (NEC) guidelines, visit our catalog. Champion Fiberglass can advise you on your joint purchase in relation to your project specs.

Champion Fiberglass offers split duct conduit for making field repairs when the cable cannot be removed. For more information on how and when to use split duct conduit, see our catalog.

Champion Fiberglass offers joints for Champion Duct®, Champion Flame Shield® and Champion Haz Duct® XW type conduit. Find out what joints are available by product line to suit your project needs and get more details.The Champion Duct® Joining System includes the Interference Joint, Straight Socket, Gasket Joint (Triple Seal), And Tight Lock Joint plus various sleeve couplings and adapters. For information on which joints to use by application, and National Electrical Code (NEC) guidelines, visit our catalog. Champion Fiberglass can advise you on your joint purchase in relation to your project specs.The Joining System for Champion Haz Duct® XW Type conduit includes the adhesive joint (the straight socket joint combined with epoxy adhesive), Straight Socket, and various alignment/expansion joint types, as well as various adapters and couplings. To estimate the number of joints and adhesive cartridges necessary for your project, see our Epoxy Adhesive Calculator.The Phenolic Joining System includes the Adhesive Joint, which is the straight socket joint combined with the appropriate adhesive. The adhesive is applied to the spigot end of the conduit. To estimate the number of joints and adhesive cartridges necessary for your project, see our Epoxy Adhesive Calculator. Various straight socket expansion joints are also available; expansion fittings should be provided to compensate for thermal expansion and contraction. You can find more information on the Phenolic Joining System in our Champion Flame Shield® catalog.

With standard sizes of 3/4” x 10’ to 12” x 20’, you can find a full listing of available diameters and lengths in our catalogs: Champion Duct® Catalog.

The Phenolic Joining System includes the Adhesive Joint, which is the straight socket joint combined with the appropriate adhesive. The adhesive is applied to the spigot end of the conduit. To estimate the number of joints and adhesive cartridges necessary for your project, see our Epoxy Adhesive Calculator. Various straight socket expansion joints are also available; expansion fittings should be provided to compensate for thermal expansion and contraction. You can find more information on the Phenolic Joining System in our Champion Flame Shield® catalog.

The Joining System for Champion Haz Duct® XW Type conduit includes the adhesive joint (the straight socket joint combined with epoxy adhesive), Straight Socket, and various alignment/expansion joint types, as well as various adapters and couplings. To estimate the number of joints and adhesive cartridges necessary for your project, see our Epoxy Adhesive Calculator.For information on which joints to use by application, and National Electrical Code (NEC) guidelines, visit our catalog. Contact us for assistance with your joint purchase in relation to your project specs.

Reliable   competitvely priced   experienced

>                                               > 

Companies We Work With

Call Today For A Free Quote

855-729-9531

Get A Quote Today

WE ARE DEDICATED TO YOU

QUALITY & TESTING

Our machinery, processes, and facility are routinely tested for quality control and compliance with industry regulations. All members of our staff are fully trained and quality checks are conducted at every stage of production to ensure we deliver excellence from start to finish.

PRODUCTION

Our team members bring multiple disciplines and levels of experience to each project. We also use cutting edge machinery to quickly and efficiently manufacture products. Our high level of production has allowed us to fabricate over 200,000 face shields a week. We maintain that same level of quality on every project.

ON-TIME DELIVERY

We understand each industry is unique and has its own unique assembly, packaging, and transportation needs. We take the needs of our clients into account during each step of the production process to guarantee we deliver excellence every time.

OUR GUARENTEE  

Innovative Solutions. Quick turnaround times. Products manufactured to precise specifications. Above all, we promise to put our clients first—to ensure our clients get what they want when they want.